|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TC7MPH3245FTG TOSHIBA Digital Integrated Circuit Silicon Monolithic TC7MPH3245FTG Low Voltage/Low Power 4-Bit x 2 Dual Supply Bus Transceiver with Bushold The TC7MP3245FTG is a dual supply, advanced high-speed CMOS 8-bit dual supply voltage interface bus transceiver fabricated with silicon gate CMOS technology. Designed for use as an interface between a 1.2-V, 1.5-V, 1.8-V, or 2.5-V bus and a 1.8-V, 2.5-V or 3.6-V bus in mixed 1.2-V, 1.5-V, 1.8-V or 2.5-V/1.8-V, 2.5-V or 3.6-V supply systems. The A-port interfaces with the 1.2-V, 1.5-V, 1.8-V or 2.5-V bus, the B-port with the 1.8-V, 2.5-V, 3.3-V bus. The direction of data transmission is determined by the level of the DIR input. The enable input ( OE ) can be used to disable the Weight: 0.03 g (typ.) device so that the buses are effectively isolated. The bus of a B bus side at floating state is maintained in an appropriate logic level due to a bushold circuit to a B bus. Moreover, the bushold circuit which is added to a B bus is off when OE is low. All inputs are equipped with protection circuits against static discharge or transient excess voltage. Features * * Bidirectional interface between 1.2-V and 1.8-V, 1.2-V and 2.5-V, 1.2-V and 3.3-V, 1.5-V and 2.5-V, 1.5-V and 3.3-V, 1.8-V and 2.5-V, 1.8-V and 3.3-V or 2.5-V and 3.3-V buses. High-speed operation: tpd = 6.8 ns (max) (VCCA = 2.5 0.2 V, VCCB = 3.3 0.3 V) tpd = 8.9 ns (max) (VCCA = 1.8 0.15 V, VCCB = 3.3 0.3 V) tpd = 10.3 ns (max) (VCCA = 1.5 0.1 V, VCCB = 3.3 0.3 V) tpd = 61 ns (max) (VCCA = 1.2 0.1 V, VCCB = 3.3 0.3 V) tpd = 9.5 ns (max) (VCCA = 1.8 0.15 V, VCCB = 2.5 0.2 V) tpd = 10.8 ns (max) (VCCA = 1.5 0.1 V, VCCB = 2.5 0.2 V) tpd = 60 ns (max) (VCCA = 1.2 0.1 V, VCCB = 2.5 0.2 V) tpd = 58 ns (max) (VCCA = 1.2 0.1 V, VCCB = 1.5 0.1 V) Output current : IOH/IOL = 12 mA (min) (VCC = 3.0 V) IOH/IOL = 9 mA (min) (VCC = 2.3 V) IOH/IOL = 3 mA (min) (VCC = 1.65 V) IOH/IOL = 1 mA (min) (VCC = 1.4 V) Latch-up performance: 300 mA ESD performance: Machine model 200 V Human body model 2000 V Ultra-small package: VQON24 Bushold circuit is build in only the B bus side. (Only in OE = "H", a former state is maintained.) Low current consumption : Using the new circuit significantly reduces current consumption when OE = "H". Suitable for battery-driven applications such as PDAs and cellular phones. Floating A-bus and B-bus are permitted. (when OE = "H") 3.6-V tolerant function provided on A-bus terminal, DIR and OE terminal. Note 1: Do not apply a signal to any bus pins when it is in the output mode. Damage may result. Note: When mounting VQON package, the type of recommended flux is RA or RMA. * * * * * * * * 1 2007-10-19 TC7MPH3245FTG Pin Assignment (top view) 2DIR 1DIR VCCA GND 1OE 2OE 24 1A1 1A2 1A3 1A4 2A1 2A2 1 2 3 4 5 6 23 22 21 20 19 18 17 16 15 14 13 1B1 1B2 1B3 1B4 2B1 2B2 2A2-4 7 8 9 10 11 12 6-8 1A1 1A2-4 2A1 1 2-4 5 1OE 1DIR 2OE 2DIR 20 23 19 24 G3 3 EN1 (BA) 3 EN2 (AB) G6 6 EN4 (BA) 6 EN5 (AB) 1 2 4 5 18 1B1 IEC Logic Symbol 15-17 1B2-4 14 2B1 11-13 2B2-4 2A3 2A4 GND VCCB 2B4 2B3 Truth Table Inputs Function 1OE L L H 1DIR L H X Bus 1A1-1A4 Output Input Z Bus 1B1-1B4 Input Output Outputs A=B B=A Z Bushold Circuit (B bus) OFF OFF ON* Inputs 2OE L L H 2DIR L H X Function Bus 2A1-2A4 Output Input Z Bus 2B1-2B4 Input Output Outputs A=B B=A Z Bushold Circuit (B bus) OFF OFF ON* X: Don't care Z: High impedance *: Logic state just before becoming disable is maintained. Marking P004 ***** Product name Lot trace code 1 pin 2 2007-10-19 TC7MPH3245FTG Block Diagram VCCA VCCB 1DIR 1OE Logic level converter 1A1-4 1B1-4 VCCA VCCB 2DIR 2OE Logic level converter 2A1-4 2B1-4 3 2007-10-19 TC7MPH3245FTG Absolute Maximum Ratings (Note 1) Characteristics Power supply voltage DC input voltage (DIR, OE ) (Note 2) Symbol VCCA VCCB VIN Rating -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 (Note 3) -0.5 to VCCA + 0.5 (Note 4) -0.5 to VCCB + 0.5 (Note 4) -50 50 25 25 50 50 Unit V V DC bus I/O voltage VI/OA VI/OB V Input diode current Output diode current DC output current IIK II/OK IOUTA IOUTB ICCA ICCB PD Tstg mA (Note 5) mA mA DC VCC/ground current per supply pin Power dissipation Storage temperature mA mW C 180 -65 to 150 Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: Don't supply a voltage to VCCB pin when VCCA is in the OFF state. Note 3: Output in OFF state Note 4: High or Low stats. IOUT absolute maximum rating must be observed. Note 5: VOUT < GND, VOUT > VCC 4 2007-10-19 TC7MPH3245FTG Operating Ranges (Note 1) Characteristics Power supply voltage (Note 2) Input voltage (DIR, OE ) Symbol VCCA VCCB VIN Rating 1.1 to 2.7 1.65 to 3.6 0 to 3.6 0 to 3.6 (Note 3) V Unit V V Bus I/O voltage VI/OA VI/OB 0 to VCCA (Note 4) 0 to VCCB (Note 4) 9 (Note 5) (Note 6) (Note 7) (Note 8) (Note 9) (Note 10) C (Note 11) ns/V mA IOUTA Output current IOUTB 3 1 12 9 3 Operating temperature Input rise and fall time Topr dt/dv -40 to 85 0 to 10 Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs and bus inputs must be tied to either VCC or GND. Please connect both bus inputs and the bus outputs with VCC or GND when the I/O of the bus terminal changes by the function. In this case, please note that the output is not short-circuited. Note 2: Don't use in VCCA > VCCB Note 3: Output in OFF state Note 4: High or low state Note 5: VCCB= 2.3 to 2.7 V Note 6: VCCB = 1.65 to 1.95 V Note 7: VCCB = 1.4 to 1.6 V Note 8: VCCA = 3.0 to 3.6 V Note 9: VCCA = 2.3 to 2.7 V Note 10: VCCA = 1.65 to 1.95 V Note 11: VIN = 0.8 to 2.0 V, VCCA = 2.5 V, VCCB = 3.0 V 5 2007-10-19 TC7MPH3245FTG Electrical Characteristics DC Characteristics (2.3 V VCCA 2.7 V, 2.7 V < VCCB 3.6 V) Characteristics Symbol VIHA VIHB L-level input voltage VILA VILB VOHA H-level output voltage VOHB VIN = VIH or VIL Test Condition DIR, OE , An Bn DIR, OE , An Bn IOHA = -100 A IOHA = -9 mA IOHB = -100 A IOHB = -12 mA VOLA L-level output voltage VOLB VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN = 0.8 V VIN = 2.0 V VIN= "L""H" VIN= "H""L" VIN = VIH or VIL IOLA = 100 A IOLA = 9 mA IOLB = 100 A IOLB = 12 mA VCCA (V) 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 VCCB (V) 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 3.0 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 3.0 2.7 to 3.6 Ta = -40 to 85C Min 1.6 2.0 Max Unit H-level input voltage V 0.7 0.8 V VCCA - 0.2 1.7 VCCB - 0.2 2.2 V 0.2 0.6 0.2 0.55 5.0 A V IOZA 3-state output OFF state current IOZB Input leakage current Bushold input minimum drive hold current Bushold input over-drive current to change state (Note) IIN IIHOLD 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 0 2.7 to 3.6 2.7 to 3.6 3.0 3.0 3.6 3.6 0 0 Open 2.7 to 3.6 5.0 5.0 A A 75 -75 IIOD IOFF1 550 -550 5.0 5.0 5.0 5.0 A Power-off leakage current IOFF2 IOFF3 ICCA VIN, VOUT = 0 to 3.6 V 2.3 to 2.7 2.3 to 2.7 A VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND VCCA (VIN, VOUT) 3.6 V VCCB (VIN, VOUT) 3.6 V VINA = VCCB - 0.6 V per input 2.3 to 2.7 A Quiescent supply current ICCB ICCA ICCB ICCTB 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 5.0 5.0 5.0 A A 750.0 Note: It is a necessary electric current to change the input in "L" or "H". 6 2007-10-19 TC7MPH3245FTG DC Characteristics (1.65 V VCCA < 2.3 V, 2.7 V < VCCB 3.6 V) Characteristics Symbol VIHA VIHB L-level input voltage VILA VILB VOHA H-level output voltage VOHB VIN = VIH or VIL Test Condition DIR, OE , An Bn DIR, OE , An Bn VCCA (V) VCCB (V) Ta = -40 to 85C Min 0.65 x VCCA 2.0 Max Unit H-level input voltage 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 2.7 to 3.6 IOHA = -100 A 1.65 to 2.3 2.7 to 3.6 IOHA = -3 mA 1.65 2.7 to 3.6 V 0.35 x VCCA 0.8 V VCCA - 0.2 1.25 VCCB - 0.2 2.2 V IOHB = -100 A 1.65 to 2.3 2.7 to 3.6 IOHB = -12 mA 1.65 to 2.3 3.0 VOLA L-level output voltage VOLB VIN = VIH or VIL VIN = VIH or VIL IOLA = 100 A IOLA = 3 mA IOLB = 100 A IOLB = 12 mA VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN = 0.8 V VIN = 2.0 V VIN= "L""H" VIN= "H""L" 1.65 to 2.3 2.7 to 3.6 1.65 2.7 to 3.6 0.2 0.3 0.2 0.55 5.0 A 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 3.0 V IOZA 3-state output OFF state current IOZB Input leakage current Bushold input minimum drive hold current Bushold input over-drive current to change state (Note) IIN IIHOLD 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 1.65 to 2.3 1.65 to 2.3 1.65 to 2.3 0 3.0 3.0 3.6 3.6 0 0 Open 5.0 2.0 A A 75 -75 IIOD IOFF1 550 -550 5.0 5.0 5.0 5.0 A Power-off leakage current IOFF2 IOFF3 ICCA VIN, VOUT = 0 to 3.6 V 1.65 to 2.3 1.65 to 2.3 A VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND VCCA (VIN, VOUT) 3.6 V VCCB (VIN, VOUT) 3.6 V VINB = VCCB - 0.6 V per input 1.65 to 2.3 2.7 to 3.6 A Quiescent supply current ICCB ICCA ICCB ICCTB 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 2.7 to 3.6 1.65 to 2.3 2.7 to 3.6 5.0 5.0 5.0 A A 750.0 Note: It is a necessary electric current to change the input in "L" or "H". 7 2007-10-19 TC7MPH3245FTG DC Characteristics (1.4 V VCCA < 1.65 V, 2.7 V < VCCB 3.6 V) Characteristics Symbol VIHA VIHB L-level input voltage VILA VILB VOHA H-level output voltage VOHB VIN = VIH or VIL Test Condition DIR, OE , An Bn DIR, OE , An Bn VCCA (V) VCCB (V) Ta = -40 to 85C Min 0.65 x VCCA 2.0 Max Unit H-level input voltage 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 2.7 to 3.6 IOHA = -100 A 1.4 to 1.65 2.7 to 3.6 IOHA = -1 mA 1.4 2.7 to 3.6 V 0.30 x VCCA 0.8 V VCCA - 0.2 1.05 VCCB - 0.2 2.2 V IOHB = -100 A 1.4 to 1.65 2.7 to 3.6 IOHB = -12 mA 1.4 to 1.65 3.0 VOLA L-level output voltage VOLB VIN = VIH or VIL VIN = VIH or VIL IOLA = 100 A IOLA = 1 mA IOLB = 100 A IOLB = 12 mA VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN = 0.8 V VIN = 2.0 V VIN= "L""H" VIN= "H""L" 1.4 to 1.65 2.7 to 3.6 1.4 2.7 to 3.6 0.2 0.35 0.2 0.55 5.0 A 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 3.0 V IOZA 3-state output OFF state current IOZB Input leakage current Bushold input minimum drive hold current Bushold input over-drive current to change state (Note) IIN IIHOLD 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 1.4 to 1.65 1.4 to 1.65 1.4 to 1.65 0 3.0 3.0 3.6 3.6 0 0 Open 5.0 2.0 A A 75 -75 IIOD IOFF1 550 -550 5.0 5.0 5.0 5.0 A Power-off leakage current IOFF2 IOFF3 ICCA VIN, VOUT = 0 to 3.6 V 1.4 to 1.65 1.4 to 1.65 A VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND VCCA (VIN, VOUT) 3.6 V VCCB (VIN, VOUT) 3.6 V VINB = VCCB - 0.6 V per input 1.4 to 1.65 2.7 to 3.6 A Quiescent supply current ICCB ICCA ICCB ICCTB 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 2.7 to 3.6 1.4 to 1.65 2.7 to 3.6 5.0 5.0 5.0 A A 750.0 Note: It is a necessary electric current to change the input in "L" or "H". 8 2007-10-19 TC7MPH3245FTG DC Characteristics (1.1 V VCCA < 1.4 V, 2.7 V < VCCB 3.6 V) Characteristics Symbol VIHA VIHB L-level input voltage VILA VILB VOHA H-level output voltage VOHB VOLA L-level output voltage VOLB VIN = VIH or VIL Test Condition DIR, OE , An Bn DIR, OE , An Bn IOHA = -100 A IOHB = -100 A IOHB = -12 mA IOLA = 100 A VIN = VIH or VIL IOLB = 100 A IOLB = 12 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN = 0.8 V VIN = 2.0 V VIN= "L""H" VIN= "H""L" VCCA (V) 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 VCCB (V) 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 3.0 2.7 to 3.6 2.7 to 3.6 3.0 2.7 to 3.6 Ta = -40 to 85C Min 0.65 x VCCA 2.0 Max Unit H-level input voltage V 0.30 x VCCA 0.8 V VCCA - 0.2 VCCB - 0.2 2.2 V 0.2 0.2 0.55 5.0 A V IOZA 3-state output OFF state current IOZB Input leakage current Bushold input minimum drive hold current Bushold input over-drive current to change state (Note) IIN IIHOLD 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 0 2.7 to 3.6 2.7 to 3.6 3.0 3.0 3.6 3.6 0 0 Open 2.7 to 3.6 5.0 2.0 A A 75 -75 IIOD IOFF1 550 -550 5.0 5.0 5.0 5.0 A Power-off leakage current IOFF2 IOFF3 ICCA VIN, VOUT = 0 to 3.6 V 1.1 to 1.4 1.1 to 1.4 A VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND VCCA (VIN, VOUT) 3.6 V VCCB (VIN, VOUT) 3.6 V VINB = VCCA - 0.6 V per input 1.1 to 1.4 A Quiescent supply current ICCB ICCA ICCB ICCTB 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 5.0 5.0 5.0 A 750.0 Note: It is a necessary electric current to change the input in "L" or "H". 9 2007-10-19 TC7MPH3245FTG DC Characteristics (1.65 V VCCA < 2.3 V, 2.3 V VCCB 2.7 V) Characteristics Symbol VIHA VIHB L-level input voltage VILA VILB VOHA H-level output voltage VOHB VIN = VIH or VIL Test Condition DIR, OE , An Bn DIR, OE , An Bn VCCA (V) VCCB (V) Ta = -40 to 85C Min 0.65 x VCCA 1.6 Max Unit H-level input voltage 1.65 to 2.3 2.3 to 2.7 1.65 to 2.3 2.3 to 2.7 1.65 to 2.3 2.3 to 2.7 1.65 to 2.3 2.3 to 2.7 IOHA = -100 A 1.65 to 2.3 2.3 to 2.7 IOHA = -3 mA 1.65 2.3 to 2.7 V 0.35 x VCCA 0.7 V VCCA - 0.2 1.25 VCCB - 0.2 1.7 V IOHB = -100 A 1.65 to 2.3 2.3 to 2.7 IOHB = -9 mA 1.65 to 2.3 2.3 VOLA L-level output voltage VOLB VIN = VIH or VIL VIN = VIH or VIL IOLA = 100 A IOLA = 3 mA IOLB = 100 A IOLB = 9mA VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN = 0.7 V VIN = 1.6 V VIN= "L""H" VIN= "H""L" 1.65 to 2.3 2.3 to 2.7 1.65 2.3 to 2.7 0.2 0.3 0.2 0.6 5.0 A 1.65 to 2.3 2.3 to 2.7 1.65 to 2.3 2.3 V IOZA 3-state output OFF state current IOZB Input leakage current Bushold input minimum drive hold current Bushold input over-drive current to change state (Note) IIN IIHOLD 1.65 to 2.3 2.3 to 2.7 1.65 to 2.3 2.3 to 2.7 1.65 to 2.3 2.3 to 2.7 1.65 to 2.3 1.65 to 2.3 1.65 to 2.3 1.65 to 2.3 0 2.3 2.3 2.7 2.7 0 0 Open 5.0 2.0 A A 45 -45 IIOD IOFF1 450 -450 5.0 5.0 5.0 5.0 A Power-off leakage current IOFF2 IOFF3 ICCA VIN, VOUT = 0 to 3.6 V 1.65 to 2.3 1.65 to 2.3 A VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND VCCA (VIN, VOUT) 3.6 V VCCB (VIN, VOUT) 3.6 V 1.65 to 2.3 2.3 to 2.7 A Quiescent supply current ICCB ICCA ICCB 1.65 to 2.3 2.3 to 2.7 1.65 to 2.3 2.3 to 2.7 1.65 to 2.3 2.3 to 2.7 5.0 5.0 5.0 A Note: It is a necessary electric current to change the input in "L" or "H". 10 2007-10-19 TC7MPH3245FTG DC Characteristics (1.4 V VCCA < 1.65 V, 2.3 V VCCB 2.7 V) Characteristics Symbol VIHA VIHB L-level input voltage VILA VILB VOHA H-level output voltage VOHB VIN = VIH or VIL Test Condition DIR, OE , An Bn DIR, OE , An Bn VCCA (V) VCCB (V) Ta = -40 to 85C Min 0.65 x VCCA 1.6 Max Unit H-level input voltage 1.4 to 1.65 2.3 to 2.7 1.4 to 1.65 2.3 to 2.7 1.4 to 1.65 2.3 to 2.7 1.4 to 1.65 2.3 to 2.7 IOHA = -100 A 1.4 to 1.65 2.3 to 2.7 IOHA = -1 mA 1.4 2.3 to 2.7 V 0.30 x VCCA 0.7 V VCCA - 0.2 1.05 VCCB - 0.2 1.7 V IOHB = -100 A 1.4 to 1.65 2.3 to 2.7 IOHB = -9 mA 1.4 to 1.65 2.3 VOLA L-level output voltage VOLB VIN = VIH or VIL VIN = VIH or VIL IOLA = 100 A IOLA = 1 mA IOLB = 100 A IOLB = 9mA VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN = 0.7 V VIN = 1.6 V VIN= "L""H" VIN= "H""L" 1.4 to 1.65 2.3 to 2.7 1.4 2.3 to 2.7 0.2 0.35 0.2 0.6 5.0 A 1.4 to 1.65 2.3 to 2.7 1.4 to 1.65 2.3 V IOZA 3-state output OFF state current IOZB Input leakage current Bushold input minimum drive hold current Bushold input over-drive current to change state (Note) IIN IIHOLD 1.4 to 1.65 2.3 to 2.7 1.4 to 1.65 2.3 to 2.7 1.4 to 1.65 2.3 to 2.7 1.4 to 1.65 1.4 to 1.65 1.4 to 1.65 1.4 to 1.65 0 2.3 2.3 2.7 2.7 0 0 Open 5.0 2.0 A A 45 -45 IIOD IOFF1 450 -450 5.0 5.0 5.0 5.0 A Power-off leakage current IOFF2 IOFF3 ICCA VIN, VOUT = 0 to 3.6 V 1.4 to 1.65 1.4 to 1.65 A VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND VCCA (VIN, VOUT) 3.6 V VCCB (VIN, VOUT) 3.6 V 1.4 to 1.65 2.3 to 2.7 A Quiescent supply current ICCB ICCA ICCB 1.4 to 1.65 2.3 to 2.7 1.4 to 1.65 2.3 to 2.7 1.4 to 1.65 2.3 to 2.7 5.0 5.0 5.0 A Note: It is a necessary electric current to change the input in "L" or "H". 11 2007-10-19 TC7MPH3245FTG DC Characteristics (1.1 V VCCA < 1.4 V, 2.3 V VCCB 2.7 V) Characteristics Symbol VIHA VIHB L-level input voltage VILA VILB VOHA H-level output voltage VOHB VOLA L-level output voltage VOLB VIN = VIH or VIL Test Condition DIR, OE , An Bn DIR, OE , An Bn IOHA = -100 A IOHB = -100 A IOHB = -9 mA IOLA = 100 A VIN = VIH or VIL IOLB = 100 A IOLB = 9 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN = 0.7 V VIN = 1.6 V VIN= "L""H" VIN= "H""L" VCCA (V) 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 VCCB (V) 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 2.3 to 2.7 2.3 to 2.7 2.3 2.3 to 2.7 Ta = -40 to 85C Min 0.65 x VCCA 1.6 Max Unit H-level input voltage V 0.30 x VCCA 0.7 V VCCA - 0.2 VCCB - 0.2 1.7 V 0.2 0.2 0.6 5.0 A V IOZA 3-state output OFF state current IOZB Input leakage current Bushold input minimum drive hold current Bushold input over-drive current to change state (Note) IIN IIHOLD 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 0 2.3 to 2.7 2.3 to 2.7 2.3 2.3 2.7 2.7 0 0 Open 2.3 to 2.7 5.0 2.0 A A 45 -45 IIOD IOFF1 450 -450 5.0 5.0 5.0 5.0 A Power-off leakage current IOFF2 IOFF3 ICCA VIN, VOUT = 0 to 3.6 V 1.1 to 1.4 1.1 to 1.4 A VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND VCCA (VIN, VOUT) 3.6 V VCCB (VIN, VOUT) 3.6 V 1.1 to 1.4 A Quiescent supply current ICCB ICCA ICCB 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 5.0 5.0 5.0 A Note: It is a necessary electric current to change the input in "L" or "H". 12 2007-10-19 TC7MPH3245FTG DC Characteristics (1.1 V VCCA < 1.4 V, 1.65 V VCCB < 2.3 V) Characteristics Symbol VIHA H-level input voltage VIHB VILA L-level input voltage VILB VOHA H-level output voltage VOHB VOLA L-level output voltage VOLB VIN = VIH or VIL Bn IOHA = -100 A IOHB = -100 A IOHB = -3 mA IOLA = 100 A VIN = VIH or VIL IOLB = 100 A IOLB = 3 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN = 0.58 V VIN = 1.07 V VIN= "L""H" VIN= "H""L" 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 Test Condition DIR, OE , An Bn DIR, OE , An VCCA (V) VCCB (V) Ta = -40 to 85C Min 0.65 x VCCA 0.65 x VCCB Max Unit 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 to 2.3 V 0.30 x VCCA 0.35 x VCCB V VCCA - 0.2 VCCB - 0.2 1.25 V 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 0.2 0.2 0.3 5.0 A V IOZA 3-state output OFF state current IOZB Input leakage current Bushold input minimum drive hold current Bushold input over-drive current to change state (Note) IIN IIHOLD 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 1.1 to 1.4 0 1.65 1.65 1.95 1.95 0 0 Open 5.0 2.0 A A 20 -20 IIOD IOFF1 300 -300 5.0 5.0 5.0 5.0 A Power-off leakage current IOFF2 IOFF3 ICCA VIN, VOUT = 0 to 3.6 V 1.1 to 1.4 1.1 to 1.4 A VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND VCCA (VIN, VOUT) 3.6 V VCCB (VIN, VOUT) 3.6 V 1.1 to 1.4 1.65 to 2.3 A Quiescent supply current ICCB ICCA ICCB 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 to 2.3 1.1 to 1.4 1.65 to 2.3 5.0 5.0 5.0 A Note: It is a necessary electric current to change the input in "L" or "H". 13 2007-10-19 TC7MPH3245FTG AC Characteristics (Ta = -40 to 85C, Input: tr = tf = 2.0 ns) VCCA = 2.5 0.2 V, VCCB= 3.3 0.3 V Characteristics Propagation delay time (Bn An) 3-state output enable time ( OE An) 3-state output disable time ( OE An) Propagation delay time (An Bn) 3-state output enable time ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL Test Condition Figure 1, Figure 2 Min 1.0 Max 5.4 Unit Figure 1, Figure 3 1.0 8.4 ns Figure 1, Figure 3 1.0 6.7 Figure 1, Figure 2 1.0 6.8 Figure 1, Figure 3 1.0 8.7 ns Figure 1, Figure 3 1.0 3.9 (Note) 0.5 ns Note: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) VCCA = 1.8 0.15 V, VCCB = 3.3 0.3 V Characteristics Propagation delay time (Bn An) 3-state output enable time ( OE An) 3-state output disable time ( OE An) Propagation delay time (An Bn) 3-state output enable time ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL Test Condition Figure 1, Figure 2 Min 1.0 Max 8.9 Unit Figure 1, Figure 3 1.0 13.4 ns Figure 1, Figure 3 1.0 10.9 Figure 1, Figure 2 1.0 7.8 Figure 1, Figure 3 1.0 10.7 ns Figure 1, Figure 3 1.0 5.2 (Note) 0.5 ns Note: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 14 2007-10-19 TC7MPH3245FTG VCCA = 1.5 0.1 V, VCCB = 3.3 0.3 V Characteristics Propagation delay time (Bn An) 3-state output enable time ( OE An) 3-state output disable time ( OE An) Propagation delay time (An Bn) 3-state output enable time ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL Test Condition Figure 1, Figure 2 Min 1.0 Max 10.3 Unit Figure 1, Figure 3 1.0 18.5 ns Figure 1, Figure 3 1.0 13.0 Figure 1, Figure 2 1.0 8.6 Figure 1, Figure 3 1.0 14.3 ns Figure 1, Figure 3 1.0 6.6 (Note) 1.5 ns Note: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) VCCA = 1.2 0.1 V, VCCB = 3.3 0.3 V Characteristics Propagation delay time (Bn An) 3-state output enable time ( OE An) 3-state output disable time ( OE An) Propagation delay time (An Bn) 3-state output enable time ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL Test Condition Figure 1, Figure 2 Min 1.0 Max 61 Unit Figure 1, Figure 3 1.0 95 ns Figure 1, Figure 3 1.0 44 Figure 1, Figure 2 1.0 22 Figure 1, Figure 3 1.0 52 ns Figure 1, Figure 3 1.0 18 (Note) 1.5 ns Note: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 15 2007-10-19 TC7MPH3245FTG VCCA = 1.8 0.15 V, VCCB = 2.5 0.2 V Characteristics Propagation delay time (Bn An) 3-state output enable time ( OE An) 3-state output disable time ( OE An) Propagation delay time (An Bn) 3-state output enable time ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL Test Condition Figure 1, Figure 2 Min 1.0 Max 9.1 Unit Figure 1, Figure 3 1.0 13.5 ns Figure 1, Figure 3 1.0 11.8 Figure 1, Figure 2 1.0 9.5 Figure 1, Figure 3 1.0 12.6 ns Figure 1, Figure 3 1.0 5.1 (Note 1) 0.5 ns Note: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) VCCA = 1.5 0.1 V, VCCB = 2.5 0.2 V Characteristics Propagation delay time (Bn An) 3-state output enable time ( OE An) 3-state output disable time ( OE An) Propagation delay time (An Bn) 3-state output enable time ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL Test Condition Figure 1, Figure 2 Min 1.0 Max 10.8 Unit Figure 1, Figure 3 1.0 18.3 ns Figure 1, Figure 3 1.0 14.2 Figure 1, Figure 2 1.0 10.5 Figure 1, Figure 3 1.0 15.4 ns Figure 1, Figure 3 1.0 6.4 (Note) 1.5 ns Note: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 16 2007-10-19 TC7MPH3245FTG VCCA = 1.2 0.1 V, VCCB = 2.5 0.2 V Characteristics Propagation delay time (Bn An) 3-state output enable time ( OE An) 3-state output disable time ( OE An) Propagation delay time (An Bn) 3-state output enable time ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL Test Condition Figure 1, Figure 2 Min 1.0 Max 60 Unit Figure 1, Figure 3 1.0 95 ns Figure 1, Figure 3 1.0 45 Figure 1, Figure 2 1.0 23 Figure 1, Figure 3 1.0 54 ns Figure 1, Figure 3 1.0 17 (Note) 1.5 ns Note: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) VCCA = 1.2 0.1 V, VCCB = 1.8 0.15 V Characteristics Propagation delay time (Bn An) 3-state output enable time ( OE An) 3-state output disable time ( OE An) Propagation delay time (An Bn) 3-state output enable time ( OE Bn) 3-state output disable time ( OE Bn) Output to output skew Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL Test Condition Figure 1, Figure 2 Min 1.0 Max 58 Unit Figure 1, Figure 3 1.0 92 ns Figure 1, Figure 3 1.0 47 Figure 1, Figure 2 1.0 30 Figure 1, Figure 3 1.0 55 ns Figure 1, Figure 3 1.0 17 (Note) 1.5 ns Note: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 17 2007-10-19 TC7MPH3245FTG Dynamic Switching Characteristics (Ta = 25C, Input: tr = tf = 2.0 ns, CL = 30 pF) Characteristics Symbol Test Condition VCCA (V) VCCB (V) 2.5 AB Quiet output maximum dynamic VOL BA VOLP VIH = VCC, VIL = 0 V (Note) 1.8 1.8 2.5 1.8 1.8 2.5 AB Quiet output minimum dynamic VOL BA VOLV VIH = VCC, VIL = 0 V (Note) 1.8 1.8 2.5 1.8 1.8 2.5 AB Quiet output maximum dynamic VOH BA VOHP VIH = VCC, VIL = 0 V (Note) 1.8 1.8 2.5 1.8 1.8 2.5 AB Quiet output minimum dynamic VOH BA VOHV VIH = VCC, VIL = 0 V (Note) 1.8 1.8 2.5 1.8 1.8 3.3 3.3 2.5 3.3 3.3 2.5 3.3 3.3 2.5 3.3 3.3 2.5 3.3 3.3 2.5 3.3 3.3 2.5 3.3 3.3 2.5 3.3 3.3 2.5 Typ. 0.8 0.8 0.6 0.6 0.25 0.25 -0.8 -0.8 -0.6 -0.6 -0.25 -0.25 Unit V V 4.6 4.6 3.3 3.3 2.3 2.3 2.0 2.0 1.7 1.7 1.3 1.3 V V Note: Parameter guaranteed by design. Capacitive Characteristics (Ta = 25C) Characteristics Input capacitance Bus I/O capacitance Symbol CIN CI/O DIR, OE An, Bn OE = "L" CPDA Power dissipation capacitance (Note) CPDB OE = "H" OE = "H" A B (DIR = "H") B A (DIR = "L") A B (DIR = "H") B A (DIR = "L") A B (DIR = "H") B A (DIR = "L") A B (DIR = "H") B A (DIR = "L") Test Circuit VCCA (V) VCCB (V) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 Typ. 7 8 3 16 0 0 16 5 0 1 pF Unit pF pF OE = "L" Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/4 (per bit) 18 2007-10-19 TC7MPH3245FTG AC Test Circuit 6.0 V or VCC x 2 Open GND Measure CL RL Switch RL Parameter tpLH, tpHL 6.0 V VCC x 2 tpLZ, tpZL Switch Open @ VCC = 3.3 0.3 V @ VCC = 2.5 0.2 V @ VCC = 1.8 0.15 V @ VCC = 1.5 0.1 V @ VCC = 1.2 0.1 V Output tpHZ, tpZH GND VCC (output) Symbol 3.3 0.3 V 2.5 0.2 V 500 30 pF 1.8 0.15 V 1 k 30 pF 1.5 0.1 V 2 k 15 pF 1.2 0.1 V 10 k 15 pF RL CL Figure 1 19 2007-10-19 TC7MPH3245FTG AC Waveform tr 2.0 ns Input (An, Bn) tf 2.0 ns 90% VM 10% VIH GND VOH VM tpLH tpHL VOL Output (Bn, An) Figure 2 tpLH, tpHL tr 2.0 ns Output enable control ( OE ) tpLZ Output (An, Bn) low to off to low tpHZ tf 2.0 ns 90% VM VIH 10% tpZL 3.0 V or VCC VX VM tpZH VOL VOH VM GND Outputs enabled Outputs disabled Outputs enabled GND Output (An, Bn) high to off to high VY Figure 3 tpLZ, tpHZ, tpZL, tpZH Symbol VIH VM VX VY VCC 3.3 0.3 V 2.7 V 1.5 V VOL + 0.3 V VOH - 0.3 V 2.5 0.2 V 1.8 0.15 V VCC VCC/2 VOL + 0.15 V VOH - 0.15 V 1.5 0.1 V 1.2 0.1 V VCC VCC/2 VOL + 0.1 V VOH - 0.1 V 20 2007-10-19 TC7MPH3245FTG Package Dimensions Weight: 0.03 g (typ.) 21 2007-10-19 TC7MPH3245FTG RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 22 2007-10-19 |
Price & Availability of TC7MPH3245FTG |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |